150w Street Light Housing Factory Introduces The Use Function Of Led Street Light Housing

150w Street Light Housing Factory Introduces The Use Function Of Led Street Light Housing

At present, the LED street lamp housing is divided into two types of stretched aluminum and die-cast aluminum. The stretched aluminum is generally 6063 aluminum, which has better thermal conductivity and heat dissipation effect. Die-cast aluminum has a poor heat dissipation effect and is heavy. 150w Street Light Housing Factory introduces In addition to this, what are the requirements for LED street light housings?

1. There should be enough space for the replaceable parts, so that the operation is not difficult and does not affect safety.

2. There should be no sharp angles, sharp edges, burrs and similar structures that can damage the wire insulation near the wiring, and metal screws should not protrude out of the wiring.

3. Lamp holder: general type: certified; special, such as light string: random test

4. Wiring terminals and power supply connection system

5. The switch should be certified (can be random) and fixed in the lamp to prevent rotation. It cannot be moved with bare hands. On-line switches or switch lamp holders can only be used for indoor lamps, unless they can meet the corresponding IP level.

The use of aluminum housing for LED street lamp housing can increase the life of the lamp and make the LED lamp housing look elegant. However, aluminum lamp housings are expensive and expensive to construct, and the lamp housings need to be processed by machine tools. Therefore, some high-quality, medium-quality LED lights will use aluminum lamp housings.


Through the above introduction, Aluminum Lamp Housing Manufacturers hopes that you can simply refer to the content of this article in future use.